Save as much as 40% on your Argon gas with the new CK GasSaver.
These front end kits provide better gas shielding, than standard collet bodies on your TIG Torch, which saves on Tungsten life and your shielding Gas. The is literally as simple as your kitchen sink — If you remove the screen from your faucet there is no control of the flow — replace the screen and you have a nice, uniform, linear flow. Using the same principle, CK Gas Saver can reduce a 30CFH flow to 20 CFH (40%) and still provide proper gas coverage. If you do this with the standard collet bodies your gas coverage won’t be adequate. You still leave all your Pre and Post flow’s as is. If you’re an A.S.M.E . code shop , you will still have proper gas coverage to make your x-ray quality welds. What I like about this product is that you can buy kits and retrofit your 17, 18, 20 and 26 style torches. No need to buy the whole torch. With Argon at about $40-$50 a cylinder I think these kits which sell for approximately $12 are well worth the money.